Toyota PRIUS 2008 Quick Reference Manual Download Page 207

Page: 207 / 535

177

2-5. Driving information

When

riving

PRIUS_U_(L/O_0802)

Winter driving tips

Carry out the necessary preparations and inspections before driving

the vehicle in winter. Always drive the vehicle in a manner appropri-

ate to the prevailing weather conditions.

Pre-winter preparations

Use fluids that are appropriate to the prevailing outside tem-
peratures.

• Engine oil
• Engine coolant
• Washer fluid

Have a service technician inspect the level and specific grav-
ity of 12 volt battery electrolyte.

Have the vehicle fitted with four snow tires or purchase a set
of tire chains for the front tires.

Ensure that all tires are the same size and brand, and that chains
match the size of the tires.

Summary of Contents for PRIUS 2008
























































































































































































































































































































































































































































































































































Search results

Summary of Contents for PRIUS 2008

Reviews:

Related manuals for PRIUS 2008

Brands by name

Popular brands

Toyota PRIUS 2008, Quick Reference Manual

Search results

Summary of Contents for PRIUS 2008

Reviews:

Related manuals for PRIUS 2008

Brands by name

Popular brands