Toyota PRIUS 2008 Quick Reference Manual Download Page 83

Page: 83 / 535

1-3. Opening, closing and locking the doors and back door

PRIUS_U_(L/O_0802)

Locking the front doors from the outside without a key

Move the inside lock button to the lock position.

Close the door while pulling the door handle.

Vehicles with smart key system

The door cannot be locked if the “POWER” switch is in ACCES-
SORY or ON mode, or the electronic key is left inside the vehicle.

Depending on the position of the electronic key, the key may not be
detected correctly and the door may be locked.

Vehicles without smart key system

The door cannot be locked if the electronic key is in the key slot.

Rear door child-protector lock

The door cannot be opened from
inside the vehicle when the locks
are set.

These locks can be set to prevent
children from opening the rear
doors. Push down rear door
switches to lock the rear doors.

STEP

Summary of Contents for PRIUS 2008
























































































































































































































































































































































































































































































































































Search results

Summary of Contents for PRIUS 2008

Reviews:

Related manuals for PRIUS 2008

Brands by name

Popular brands

Toyota PRIUS 2008, Quick Reference Manual

Search results

Summary of Contents for PRIUS 2008

Reviews:

Related manuals for PRIUS 2008

Brands by name

Popular brands