Toyota PRIUS 2008 Quick Reference Manual Download Page 476

Page: 476 / 535

450

5-2. Steps to take in an emergency

PRIUS_U_(L/O_0802)

If the electronic key does not operate properly

Locking and unlocking the doors

Using the mechanical key in
order to perform the following
operations:

Locks all doors

Unlocks the door

Turning the key rearward unlocks
the driver’s door. Turning the key
once again unlocks the other
doors.

Starting the hybrid system

To start the hybrid system, insert
the key into the key slot.
(

→

P. 132)

If the electronic key 12 volt battery is discharged, the doors can be

opened by the mechanical key. The engine system can be still

started by following the procedure.

ITY52P014

ITY52P015

Replacing the key battery

As this procedure is the temporary measure, it is recommended that the
electronic key battery be replaced immediately. (

→

P. 396)

Summary of Contents for PRIUS 2008
























































































































































































































































































































































































































































































































































Search results

Summary of Contents for PRIUS 2008

Reviews:

Related manuals for PRIUS 2008

Brands by name

Popular brands

Toyota PRIUS 2008, Quick Reference Manual

Search results

Summary of Contents for PRIUS 2008

Reviews:

Related manuals for PRIUS 2008

Brands by name

Popular brands