Toyota PRIUS 2008 Quick Reference Manual Download Page 108

Page: 108 / 535

1-5. Opening and closing the windows and moon roof

Be
fo

re driving

PRIUS_U_(L/O_0802)

CAUTION

When closing the windows

Observe the following precautions.
Failing to do so may result in death or serious injury.

Check to make sure that all passengers do not have any part of their body
in a position where it could be caught when a window is being operated.

Do not allow children to operate the power windows.
Closing a power window on someone can cause death or serious injury.

Jam protection function driver’s window only

Never try jamming any part of your body to activate the jam protection
function intentionally.

The jam protection function may not work if something gets caught just
before the window fully closes.

Summary of Contents for PRIUS 2008
























































































































































































































































































































































































































































































































































Search results

Summary of Contents for PRIUS 2008

Reviews:

Related manuals for PRIUS 2008

Brands by name

Popular brands

Toyota PRIUS 2008, Quick Reference Manual

Search results

Summary of Contents for PRIUS 2008

Reviews:

Related manuals for PRIUS 2008

Brands by name

Popular brands