Toyota PRIUS 2008 Quick Reference Manual Download Page 455

Page: 455 / 535

W
hen

troub

le
arises

429

5-2. Steps to take in an emergency

PRIUS_U_(L/O_0802)

Have the malfunction repaired immediately.

After taking the specified steps to correct the suspected problem,
check that the warning light turns off.

Warning light

Warning light/Details

Correction procedure

Open door warning light
(warning buzzer)

A door or a back door is
not fully closed.

Check that all doors and the
back door are closed.

Low fuel level warning
light

Remaining fuel
(Approximately 3.0 gal.
[11.4 L, 2.5 Imp.gal.] or
less)

Refuel the vehicle.

Driver’s seat belt
reminder light (warning
buzzer)

Warns the driver to fasten
his/her seat belt.

Fasten the seat belt.

Front passenger’s seat
belt reminder light
(warning buzzer)

Warns the front passen-
ger to fasten his/her seat
belt.

Fasten the seat belt.

Tire pressure warning
light

When the light comes on:
Low tire inflation pressure.

Adjust the tire inflation
pressure.

When the light stays on
after blinking for 1 minute:
Malfunction in the tire
pressure warning system.

Have the system checked
by your Toyota dealer.

Summary of Contents for PRIUS 2008
























































































































































































































































































































































































































































































































































Search results

Summary of Contents for PRIUS 2008

Reviews:

Related manuals for PRIUS 2008

Brands by name

Popular brands

Toyota PRIUS 2008, Quick Reference Manual

Search results

Summary of Contents for PRIUS 2008

Reviews:

Related manuals for PRIUS 2008

Brands by name

Popular brands