Toyota PRIUS 2008 Quick Reference Manual Download Page 343

Page: 343 / 535

315

3-4. Using the hands-free system

Interior features

PRIUS_U_(L/O_0802)

Select the phone to be use, then

touch .

If no phones are registered,
“Empty” will be displayed.

If “Bluetooth

connection suc-

cessful” is displayed, registration
was successful.

If another Bluetooth

phone is

already connected, a confirmation
message is displayed. Touch

:Bluetooth is a registered trade-

mark of Bluetooth SIG. Inc.

Displaying Bluetooth

information

You can check the device address and device name.

Press .

Touch

on the “Information” screen.

Touch

on the “Telephone” screen.

Touch

on the “Settings” screen.

On the “Select Telephone” screen, select the desired phone

and touch

To change the device name,

touch

in the “Device

Name” section, and input the
name on the “Name” screen
(max. 20 characters).

ITY34P050

STEP

ITY34P051

STEP

Summary of Contents for PRIUS 2008
























































































































































































































































































































































































































































































































































Search results

Summary of Contents for PRIUS 2008

Reviews:

Related manuals for PRIUS 2008

Brands by name

Popular brands

Toyota PRIUS 2008, Quick Reference Manual

Search results

Summary of Contents for PRIUS 2008

Reviews:

Related manuals for PRIUS 2008

Brands by name

Popular brands