Toyota PRIUS 2008 Quick Reference Manual Download Page 375

Page: 375 / 535

348

4-1. Maintenance and care

PRIUS_U_(L/O_0802)

Cleaning and protecting the vehicle’s interior

The following procedures will help protect your vehicle’s interior and

keep it in top condition:

Protecting the vehicle interior

Remove dirt and dust using a vacuum cleaner. Wipe dirty sur-
faces with a cloth dampened with lukewarm water.

Cleaning the leather areas

Remove dirt and dust using a vacuum cleaner.

Wipe any excess dirt and dust with a soft cloth dampened with
diluted detergent.

Use a diluted water solution of approximately 5% neutral wool deter-
gent.

Wring out any excess water from the cloth and thoroughly
wipe off all remaining traces of detergent.

Wipe the surface with a dry, soft cloth to remove any remain-
ing moisture. Allow the leather to dry in shaded and ventilated
area.

Synthetic leather areas

Remove loose dirt using a vacuum cleaner.

Apply a mild soap solution to the synthetic leather using a
sponge or soft cloth.

Allow the solution to soak in for a few minutes. Remove the
dirt and wipe off the solution with a clean, damp cloth.

Summary of Contents for PRIUS 2008
























































































































































































































































































































































































































































































































































Search results

Summary of Contents for PRIUS 2008

Reviews:

Related manuals for PRIUS 2008

Brands by name

Popular brands

Toyota PRIUS 2008, Quick Reference Manual

Search results

Summary of Contents for PRIUS 2008

Reviews:

Related manuals for PRIUS 2008

Brands by name

Popular brands