Toyota PRIUS 2008 Quick Reference Manual Download Page 257

Page: 257 / 535

229

3-3. Using the audio system

Interior features

PRIUS_U_(L/O_0802)

Traffic announcement

Touch

on the screen.

“TRAF SEEK” appears on the dis-
play, and the radio will start seek-
ing any station broadcasting
traffic program information.

If no traffic program station is
found, “NOTHING” appears on
the display.

satellite radio (if equipped)

Receiving XM

satellite radio

Press

until “SAT” appears

on the screen.

The display changes as follows
each time the switch is pressed.

→

SAT1

→

SAT2

→

SAT3

Turn the

dial to select a desired channel from all the

categories or press

∧

∨

to select a desired

channel in the current category.

Presetting XM

satellite radio channels

Select the desired channel. Touch one of the preset stations (1 - 6)
and hold it until you hear a beep.

Changing the channel category

Touch

on the screen.

STEP

TUNE FILE

Summary of Contents for PRIUS 2008
























































































































































































































































































































































































































































































































































Search results

Summary of Contents for PRIUS 2008

Reviews:

Related manuals for PRIUS 2008

Brands by name

Popular brands

Toyota PRIUS 2008, Quick Reference Manual

Search results

Summary of Contents for PRIUS 2008

Reviews:

Related manuals for PRIUS 2008

Brands by name

Popular brands