Toyota PRIUS 2008 Quick Reference Manual Download Page 370

Page: 370 / 535

342

3-7. Other interior features

PRIUS_U_(L/O_0802)

Test the operation of the HomeLink

by pressing the newly

programmed button. Check to see if the gate/device operates
correctly.

Repeat the steps above to program another device for each of
the remaining HomeLink

buttons.

Programming other devices

To program other devices such as home security systems, home
door locks or lighting, contact your authorized Toyota dealer for
assistance.

Reprogramming a button

The individual HomeLink

buttons cannot be erased but can be

reprogrammed. To reprogram a button, follow the “Basic program-
ming” instructions.

Operating the HomeLink

Press the appropriate HomeLink

button. The HomeLink

indicator

light on the HomeLink

transceiver should turn on.

The HomeLink

continues to send a signal for up to 20 seconds as long

as the button is pressed.

Erasing the entire HomeLink

memory (all three programs)

Press and hold down the 2 out-
side buttons for 20 seconds until
the indicator light flashes.

If you sell your vehicle, be sure to
erase the programs stored in the
HomeLink

memory.

STEP

ITY37P020

Summary of Contents for PRIUS 2008
























































































































































































































































































































































































































































































































































Search results

Summary of Contents for PRIUS 2008

Reviews:

Related manuals for PRIUS 2008

Brands by name

Popular brands

Toyota PRIUS 2008, Quick Reference Manual

Search results

Summary of Contents for PRIUS 2008

Reviews:

Related manuals for PRIUS 2008

Brands by name

Popular brands