manualshive.com logo in svg

Toyota LAND CRUISER, Owner'S Manual

Share
Download
Toyota LAND CRUISER Owner'S Manual Download Page 54

53

1-2. Opening, closing and locking the doors

1

B

e

fo

re

 d

riv

in

g

L/C200_OM_OM60K60E_(AE)

■

Using the mechanical key (Vehicles with a smart entry & start system)

The doors can also be locked and unlocked with the mechanical key. 
(

→

P. 32)

■

Customization that can be configured at Toyota dealer

Settings (e.g. unlocking function using a key) can be changed. 
(Customizable features 

→

P. 593)

CAUTION

■

To prevent an accident

Observe the following precautions while driving the vehicle.
Failing to do so may result in a door opening and an occupant falling out,
resulting in death or serious injury.

●

Always use a seat belt.

●

Always lock all doors.

●

Ensure that all doors are properly closed.

●

Do not pull the inside handle of the doors while driving.
The doors may be opened and the passengers are thrown out of the vehi-
cle and it may result in death or serious injury.

Be especially careful for the driver’s door, as the door may be opened
even if the inside lock button is in locked position.

●

Set the rear door child-protector locks when children are seated in the rear
seat. 

Not 

for 

Reproduction

Summary of Contents for LAND CRUISER















































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands