manualshive.com logo in svg

Toyota LAND CRUISER, Owner'S Manual

Share
Download
Toyota LAND CRUISER Owner'S Manual Download Page 182

181

2-1. Driving procedures

2

Wh

en d

riv

in

g

L/C200_OM_OM60K60E_(AE)

CAUTION

●

Do not shift the shift lever to “P” while the vehicle is moving. 
Doing so can damage the transmission and may result in a loss of vehicle
control.

●

Do not shift the shift lever to “R” while the vehicle is moving forward. 
Doing so can damage the transmission and may result in a loss of vehicle
control.

●

Do not shift the shift lever to “D” while the vehicle is moving backward. 
Doing so can damage the transmission and may result in a loss of vehicle
control.

●

Moving the shift lever to “N” while the vehicle is moving will disengage the
engine from the transmission. Engine braking is not available when “N” is
selected.

●

During normal driving, do not turn off the engine. Turning the engine off
while driving will not cause loss of steering or braking control, but the
power assist to these systems will be lost. This will make it more difficult to
steer and brake, so you should pull over and stop the vehicle as soon as it
is safe to do so. 
However, in the event of an emergency, such as if it becomes impossible
to stop the vehicle in the normal way: 

→

P. 570

●

Use engine braking (downshift) to maintain a safe speed when driving
down a steep hill.
Using the brakes continuously may cause the brakes to overheat and lose
effectiveness. (

→

P. 201)

●

When stopped on an inclined surface, use the brake pedal and parking
brake to prevent the vehicle from rolling backward or forward and causing
an accident.

●

Do not adjust the position of the steering wheel, the seat, or the inside or
outside rear view mirrors while driving.
Doing so may result in a loss of vehicle control that can cause accidents
that may result in death or serious injury.

●

Always check that all passengers’ arms, heads or other parts of their bod-
ies are not outside the vehicle, as this may result in death or serious injury.

Not 

for 

Reproduction

Summary of Contents for LAND CRUISER















































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands