manualshive.com logo in svg

Toyota LAND CRUISER, Owner'S Manual

Share
Download
Toyota LAND CRUISER Owner'S Manual Download Page 278

277

2-4. Using other driving systems

2

Wh

en d

riv

in

g

L/C200_OM_OM60K60E_(AE)

■

The Crawl Control and Turn Assist function can be operated when

Crawl Control

●

The engine is running.

●

The shift lever is in any gear other than “P” or “N”.

●

The four-wheel drive control switch is in “L4”.

●

The driver’s door is closed.

Turn Assist function

●

Crawl Control is operating.

●

The center differential is not locked.

●

The accelerator and brake are not being operated.

●

The shift lever is in any gear other than “P”, “R” or “N”.

●

The steering wheel is turned very far.

■

Automatic system cancelation

Crawl Control

In the following situations, the buzzer will sound intermittently and Crawl
Control will be canceled automatically. In this event, the Crawl Control indi-
cator will flash and then go off, the Turn Assist indicator will go off (if the Turn
Assist function is in use), and a message stating that Crawl Control has
been turned off will be displayed on the multi-information display (if
equipped) for several seconds.

●

When the shift lever is moved to “P” or “N”.

●

When the four-wheel drive control switch is in “H4”.

●

When the driver’s door is opened.

Turn Assist function

When the center differential is locked, the buzzer will sound intermittently
and the Turn Assist function will be canceled automatically. In this event, the
Turn Assist indicator will go off, and a message stating that the Turn Assist
function has been turned off will be displayed on the multi-information dis-
play (if equipped) for several seconds.

Not 

for 

Reproduction

Summary of Contents for LAND CRUISER















































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands