manualshive.com logo in svg

Toyota LAND CRUISER, Owner'S Manual

Share
Download
Toyota LAND CRUISER Owner'S Manual Download Page 447

446

4-3. Do-it-yourself maintenance

L/C200_OM_OM60K60E_(AE)

■

When to replace your vehicle’s tires

Tires should be replaced if:

●

You have tire damage such as cuts, splits, cracks deep enough to
expose the fabric or bulges indicating internal damage

●

A tire goes flat repeatedly or cannot be properly repaired due to the size
or location of a cut or other damage

If you are not sure, consult with your Toyota dealer.

■

Tire life

Any tire over 6 years old must be checked by a qualified technician even if
they have seldom or never been used or damage is not obvious.

■

If the tread wears down 4 mm (0.16 in.) or more on snow tires

The effectiveness of snow tires is lost.

Not 

for 

Reproduction

Summary of Contents for LAND CRUISER















































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands