manualshive.com logo in svg

Toyota LAND CRUISER, Owner'S Manual

Share
Download
Toyota LAND CRUISER Owner'S Manual Download Page 316

315

2-4. Using other driving systems

2

Wh

en d

riv

in

g

L/C200_OM_OM60K60E_(AE)

■

Automatic Active TRC, VSC and Trailer Sway Control reactivation

If the Active TRC, VSC and Trailer Sway Control are turned off, the systems
will not turn on even when vehicle speed increases.

■

If the brake system overheats

The brake system may overheat. In this case, a buzzer will sound, and the
“TRC OFF” indicator will flash or “TRC OFF” will be displayed on the multi-
information display (if equipped), and Active TRC and hill-start assist control
will be temporarily inoperable. In this event, stop the vehicle immediately in a
safe place, and allow the brake system to cool down sufficiently until the
“TRC OFF” on the multi-information display (if equipped) or “TRC OFF” indi-
cator go off. (There is no problem with continuing normal driving.)

■

Sounds and vibrations caused by the Multi Terrain ABS, brake assist,
Active TRC, VSC, Trailer Sway Control and hill-start assist control

●

A sound may be heard from the engine compartment when the engine is
started or just after the vehicle begins to move. This sound does not indi-
cate that a malfunction has occurred in any of these systems. 

●

Any of the following conditions may occur when the above systems are
operating. None of these indicates that a malfunction has occurred. 

• Vibrations may be felt through the vehicle body and steering.
• A motor sound may be heard after the vehicle comes to a stop.
• The brake pedal may pulsate slightly after the Multi Terrain ABS is acti-

vated.

• The brake pedal may move down slightly after the Multi Terrain ABS is

activated.

■

Hill-start assist control is operational when

●

The shift lever is in “D” or “S”.

●

The brake pedal is not depressed.

Not 

for 

Reproduction

Summary of Contents for LAND CRUISER















































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands