manualshive.com logo in svg

Toyota LAND CRUISER, Owner'S Manual

Share
Download
Toyota LAND CRUISER Owner'S Manual Download Page 302

301

2-4. Using other driving systems

2

Wh

en d

riv

in

g

L/C200_OM_OM60K60E_(AE)

■

The Multi-terrain Monitor can be operated when

Normal display mode

The vehicle speed is less than approximately 12 km/h (7 mph).

Automatic display mode

●

When automatic display mode is selected

●

When the shift lever is shifted to “D”, “S” or “N”

●

When the shift lever is in “D”, “S” or “N” and the vehicle speed is below

approximately 10 km/h (6 mph)

■

Automatic system cancellation

In the following situations, the image is canceled automatically.

●

When the vehicle speed exceeds approximately 12 km/h (7 mph).

After the vehicle speed exceeds approximately 12 km/h (7 mph), the
image will continue to be displayed for a short time.
If the vehicle speed returns to below 12 km/h (7 mph) before the image
extinguishes, the image will continue to be displayed.

●

When “MAP” or another switch outside the screen has been pressed

■

Interruption screens

An interruption screen is displayed when an obstacle is within the detection
range of the Toyota parking assist-sensor. (

→

P. 258)

■

When the door mirrors are folded.

The screen will be turned off temporarily while the door mirrors are folding,
and the screen will return to normal once folding has been completed.

Not 

for 

Reproduction

Summary of Contents for LAND CRUISER















































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands