manualshive.com logo in svg

Toyota LAND CRUISER, Owner'S Manual

Share
Download
Toyota LAND CRUISER Owner'S Manual Download Page 123

122

1-4. Opening and closing the windows and moon roof

L/C200_OM_OM60K60E_(AE)

■

When the moon roof does not close normally

Perform the following procedure:

●

If the moon roof closes but then re-opens slightly

Stop the vehicle.

Press and hold the “CLOSE” switch.

*

1

The moon roof will close, reopen and pause for approximately 10
seconds.

*

2

 Then it will close again, tilt up and pause for approxi-

mately 1 second. Finally, it will tilt down, open and close.

Check to make sure that the moon roof is completely closed and
then release the switch.

●

If the moon roof tilts down but then tilts back up

Stop the vehicle.

Press and hold the “UP” switch

*

1

 until the moon roof moves into the

tilt up position and stops.

Release the “UP” switch once and then press and hold the “UP”
switch again.

*

1

The moon roof will pause for approximately 10 seconds in the tilt up
position.

*

2

 Then it will adjust slightly and pause for approximately 1

second. Finally, it will tilt down, open and close.

Check to make sure that the moon roof is completely closed and
then release the switch.

*

1

: If the switch is released at the incorrect time, the procedure will

have to be performed again from the beginning.

*

2

: If the switch is released after the above mentioned 10 second

pause, automatic operation will be disabled. In that case, press
and hold the “CLOSE” or “UP” switch, and the moon roof will tilt
up and pause for approximately 1 second. Then it will tilt down,
open and close. Check to make sure that the moon roof is com-
pletely closed and then release the switch.

If the moon roof does not fully close even after performing the above proce-
dure correctly, have the vehicle inspected by your Toyota dealer.

STEP

1

STEP

2

STEP

3

STEP

1

STEP

2

STEP

3

STEP

4

Not 

for 

Reproduction

Summary of Contents for LAND CRUISER















































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands