manualshive.com logo in svg

Toyota LAND CRUISER, Owner'S Manual

Share
Download
Toyota LAND CRUISER Owner'S Manual Download Page 279

278

2-4. Using other driving systems

L/C200_OM_OM60K60E_(AE)

■

Function limitations

Crawl Control

●

In the following situations, brake control can be used to drive downhill at
a constant speed. However, engine control is not available when driving
uphill at a constant speed.

• When switched to second start mode.

●

In the following situation, engine control and brake control will stop tem-
porarily. In this event, the Crawl Control indicator will flash.

• When the vehicle speed exceeds approximately 25 km/h (15 mph).

Turn Assist function

In the following situations, the Turn Assist function will stop temporarily. In
this event, the Turn Assist indicator will flash.

●

When the vehicle speed exceeds approximately 10km/h (6 mph).

●

When the shift lever is moved to “R”.

■

When the Crawl Control system is operated continuously

●

If Crawl Control is used continuously for a long time, the buzzer will
sound, a malfunction notification will be displayed on the multi-informa-
tion display (if equipped), the Crawl Control indicator will go off, and
Crawl Control will be temporarily inoperable as a result of the brake sys-
tem overheating. In this event, stop the vehicle immediately in a safe
place, and allow the brake system to cool down sufficiently until the “TRC
OFF” on the multi-information display (if equipped) or “TRC OFF” indica-
tor goes off. (In the meantime, normal driving is possible.)

●

If Crawl Control is used continuously for a long time, the buzzer will
sound, the system will be temporarily canceled, and a malfunction notifi-
cation will be displayed on the multi-information display (if equipped) as a
result of the automatic transmission system overheating. Stop the vehicle
in a safe place until the display goes off.

Not 

for 

Reproduction

Summary of Contents for LAND CRUISER















































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands