manualshive.com logo in svg

Toyota LAND CRUISER, Owner'S Manual

Share
Download
Toyota LAND CRUISER Owner'S Manual Download Page 266

265

2-4. Using other driving systems

2

Wh

en d

riv

in

g

L/C200_OM_OM60K60E_(AE)

■

Display on/off setting

On or off can be selected for Toyota parking assist-sensor display.

Touch “Display Off”.

When the “Display Off” indicator is turned on, the display of Toyota
parking assist-sensor will be off. Touch “Display Off” again to turn the
display of Toyota parking assist-sensor on.

Touch “OK”.

■

Alert distance setting

Front or rear center sensors display and tone indication can be set.

Touch “Rear”.

Long distance or short distance can be selected.

Touch “OK”.

■

The Toyota parking assist-sensor can be operated when

●

Front corner sensors:

• The “ENGINE START STOP” switch is in IGNITION ON mode.
• The shift lever is in a position other than “P”.
• The vehicle speed is less than approximately 10 km/h (6 mph).

●

Rear corner and rear center sensors:

• The “ENGINE START STOP” switch is in IGNITION ON mode.
• The shift lever is in “R”.

■

Toyota parking assist-sensor display

When an obstacle is detected while the Toyota parking assist monitor or
Multi-terrain Monitor is in use, the warning indicator will appear in the top
right of the screen even if the display setting has been set to off.

STEP

1

STEP

2

STEP

1

STEP

2

Not 

for 

Reproduction

Summary of Contents for LAND CRUISER















































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands