2. INSTALLATION WORK
66
(2) If the machine is not level, make it level with
packings.
Listed below are packings available for weav-
ing machines.
Insert felt packings or steel packings under the bot-
tom of the side frames' feet as shown at left.
4:
Felt packing
5:
Steel packing
6:
Side frame's foot
NOTE:
Felt packing 4 should always be the bottom
layer of the packings.
NOTE:
Packings should be exactly under the bot-
tom of the side frames’ feed as shown at left.
In the case of aeropad specification
a. No frame feet
Bond the steel packing on the side frame's feet
using Araldite.
b. With frame feet
Insert the steel packing between the side
frame's and frame feet, and fix both feet by
tightening the bolt.
When inserting packings beneath the machine, lift
up the weaving machine with small jacks 7 which
should be applied to front cloth rail 8 and back cloth
rail 9 as shown at left.
[ 2 ] Installing the cheese stand base
[ 2.1 ]
Installation with roundhead bolts
As shown below, install the cheese stand base to
the floor with roundhead bolts according to your
floor plan.
Cheese stand base
Roundhead bolt
Polymortar
Frame
feet
Packings
Frame
feet
Frame
feet
Packings
Pa
ck
ing
s
Type
Thickness
Application
Felt
packing
2 mm
To compensate for the sur-
face irregularity of the floor.
(This type should be used
only for the gluing installation
method using Araldite.)
Steel
packing
1, 2, or 3.2
mm
Correct loom leveling using a
combination of three packing
types (in thickness).
