manualshive.com logo in svg

Toyota Highlander guide, Service Manual

Share
Download
Toyota Highlander guide Service Manual Download Page 95

95

2. Instrument cluster

2

Instrum

e

nt clus

ter

HIGHLANDER_U (OM0E017U)

Drive information

Select to display various drive
data. (

→

P. 97)

Navigation system-

linked display (if
equipped)

Select to display the following navigation system-linked information.

• Route guidance
• Compass display (north-up display/heading-up display)

Audio system-linked display (if equipped)

Select to enable selection of an audio source or track on the meter
using the meter control switches.

Driving assist system information

Select to display the operational status of the following systems:

• Dynamic radar cruise control (

→

P. 285)

• LDA (Lane Departure Alert with steering control) (

→

P. 275)

Stop & Start system information (if equipped)

Select to display the operational status of the Stop & Start system.
(

→

P. 297)

Warning message display

Select to display warning messages and measures to be taken if a
malfunction is detected. (

→

P. 591)

Settings display

Select to change the meter display settings. (

→

P. 99)

Multi-information display

Display contents

Summary of Contents for Highlander guide





























































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands