Toyota Highlander guide, Service Manual

Page: 99 / 732

99
2. Instrument cluster
2
Instrum
e
nt clus
ter
HIGHLANDER_U (OM0E017U)
Select using the meter control switches.
Select an item and then set it with the center button.
■
LDA (Lane Departure Alert with steering control) settings
→
P. 683
■ PCS (Pre-Collision System) settings
→ P. 683
■
BSM (Blind Spot Monitor) settings (if equipped)
Select to activate/deactivate the BSM (Blind Spot Monitor).
(
→
P. 684)
■
Power mode (driving mode) settings (if equipped)
Select to activate/deactivate the power mode. (
→
P. 684)
■
Stop & Start system settings (if equipped)
The length of time the Stop & Start system will operate when the “A/
C” switch of the air conditioning system is on can be set to 2 differ-
ent levels. (
→
P. 684)
■
Meter settings
●
Language
Select to change the language on the display.
●
Units
Select to change the unit of measure for fuel consumption.
●
Maintenance system (for U.S.A.)
Select to reset the maintenance data after the required mainte-
nance is performed. (
→ P. 508)
●
Eco Driving Indicator Light
Select to activate/deactivate the Eco Driving Indicator Light.
(
→ P. 102)
●
switch settings
You can register 1 screen as the top screen. To register, press
and hold while the desired screen is displayed.
●
Drive information 1 through 3
Select to select up to 2 items that will be displayed on a Drive
information screen, up to 3 Drive information screens can be set.
Settings display
1
2