manualshive.com logo in svg

Toyota Highlander guide, Service Manual

Share
Download
Toyota Highlander guide Service Manual Download Page 475

475

6-4. Using the other interior features

6

In

te

rior fe

atures

HIGHLANDER_U (OM0E017U)

The USB charging ports are used to supply 2.1 A of electricity at 5 V
to external devices. 
The USB charging ports are for charging only. They are not designed
for data transfer or other purposes.
Depending on the external device, it may not charge properly. Refer to
the manual included with the device before using a USB charging
port.

■

Using the USB charging ports

Open the lid.

■

The USB charging ports can be used when

Vehicles without a smart key system

The engine switch is in the “ACC” or “ON” position.

Vehicles with a smart key system

The engine switch is in ACCESSORY or IGNITION ON mode.

■

Situations in which the USB charging ports may not operate correctly

●

If a device which consumes more than 2.1 A at 5 V is connected

●

If a device designed to communicate with a personal computer, such as a
USB memory device, is connected

●

If the connected external device is turned off (depending on device)

●

If the temperature inside the vehicle is high, such as after the vehicle has
been parked in the sun

■

About connected external devices

Depending on the connected external device, charging may occasionally be
suspended and then start again. This is not a malfunction.

USB charging ports

Front

Rear

Summary of Contents for Highlander guide





























































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands