Toyota Highlander guide, Service Manual

Page: 430 / 732

430
5-11. Using the voice command system
HIGHLANDER_U (OM0E017U)
■
Microphone
→
P. 398
■
When using the microphone
●
It is unnecessary to speak directly into the microphone when giving a com-
mand.
●
When “Voice Prompt Interrupt” set to on, it is not necessary to wait for the
confirmation beep before speaking a command. (
→
P. 362)
●
Voice commands may not be recognized if:
• Spoken too quickly.
• Spoken at a low or high volume.
• The roof or windows are open.
• Passengers are talking while voice commands are spoken.
• The air conditioning speed is set high.
• The air conditioning vents are turned towards the microphone.
●
In the following conditions, the system may not recognize the command
properly and using voice commands may not be possible:
• The command is incorrect or unclear. Note that certain words, accents or
speech patterns may be difficult for the system to recognize.
• There is excessive background noise, such as wind noise.
Due to natural language speech recognition technology, this system
enables recognition of a command when spoken naturally. However,
the system cannot recognize every variation of each command.
In some situations, it is possible to omit the command for the proce-
dure and directly state the desired operation.
Not all voice commands are displayed in the short cut menu.
This function is available in English, Spanish and French.
■
Expression examples for each function
Casual speech recognization
Command Expression examples
“Call <name>
<type>” Get me <Robert Brown>.
Dial <Robert Brown> on his <mobile> phone.
“Dial <number>”
Dial <3334445555>.
Ring <3334445555>.