Toyota Highlander guide Service Manual Download Page 305

Page: 305 / 732

305

4-5. Using the driving support systems

Drivin

HIGHLANDER_U (OM0E017U)

●

When the engine automatically restarts while stopped by the Stop & Start
system

■

If “Stop & Start System Malfunction Visit Your Dealer” is displayed on
the multi-information display

The system may be malfunctioning. Have the vehicle inspected by Toyota
dealer.

■

If the Stop & Start cancel indicator continues to flash

The system may be malfunctioning. Have the vehicle inspected by Toyota
dealer.

Message

Details

“For Climate Con-
trol”

• The air conditioning system has been turned

on or is being used.

•

has been turned on.

“For Brake System”

The brake pedal has been depressed further
or pumped.

The system will be enabled after the engine
runs and the brake booster vacuum reaches a
predetermined level.

“Battery Charging”

The battery charge amount may be low.

The engine is restarted to prioritize battery
charging. Operating the engine for a short
while allows the system to recover.

“Steering Wheel
Turned”

The steering wheel was operated.

“Driver Seat Belt
Unbuckled”

The driver seat belt has been unfastened.

Summary of Contents for Highlander guide





























































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Highlander guide

Reviews:

Related manuals for Highlander guide

Brands by name

Popular brands

Toyota Highlander guide, Service Manual

Search results

Summary of Contents for Highlander guide

Reviews:

Related manuals for Highlander guide

Brands by name

Popular brands