manualshive.com logo in svg

Toyota Highlander guide, Service Manual

Share
Download
Toyota Highlander guide Service Manual Download Page 183

183

3-5. Opening and closing the windows

3

Op
eration

 o

f each

 compo

nen
t

HIGHLANDER_U (OM0E017U)

■

When the shade does not close normally

Perform the following procedure:

Stop the vehicle.
Close the moon roof.
Slide the shade switch forward and hold it.

* 

The shade will close then reopen and pause for approximately10 seconds.
Then it will close.
Check to make sure that the shade is completely closed and then release
the switch.

*

: If the switch is released at the incorrect time, the procedure will have to be

performed again from the beginning.

If the shade continues to close but then reopens slightly even after perform-
ing the above procedure correctly, have the vehicle inspected by your Toyota
dealer.

■

Moon roof open warning buzzer

The buzzer sounds and a message is shown on the multi-information display
in the instrument cluster when the engine switch is turned off and the driver’s
door is opened with the moon roof open.

1

2

3

4

Summary of Contents for Highlander guide





























































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands