manualshive.com logo in svg

Toyota Highlander guide, Service Manual

Share
Download
Toyota Highlander guide Service Manual Download Page 607

607

8-2. Steps to take in an emergency

8

Wh
en tro

uble

 a

ris

es

HIGHLANDER_U (OM0E017U)

*

: The engine may not be restarted depending on the vehicle condition.

■

Messages displays

The message illustrations used are intended as examples, and may differ
from the image that is actually displayed on the multi-information display.

■

Warning buzzer

 

→

P. 587

Once

⎯

The engine switch has been
turned off with the shift lever in
a position other than P.

→

Shift the shift lever to P.

Once

⎯

After the engine switch has
been turned off with the shift
lever in a position other than P,
the shift lever has been shifted
to P.

→

Turn the engine switch off.

Con-
tinu-
ous

⎯

Indicates that the engine was
stopped in an emergency while
driving

→

To restart the engine, shift
the shift lever to N and turn
the engine switch to IGNI-
TION ON mode.

*

Once

⎯

Indicates that the engine switch
has been pressed while driving

→

Except when emergency
stopping of the vehicle is
needed, immediately
release the engine switch.

Interior

buzzer

Exterior

buzzer

Warning message

Details/Actions

(Flashes)

(Flashes)

(Flashes)

(Flashes)

Summary of Contents for Highlander guide





























































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands