manualshive.com logo in svg

Toyota Highlander guide, Service Manual

Share
Download
Toyota Highlander guide Service Manual Download Page 125

125

3-2. Opening, closing and locking the doors

3

Op
eration

 o

f each

 compo

nen
t

HIGHLANDER_U (OM0E017U)

Vehicles with a smart key system

Opens and closes the power
back door (press and hold)

Pressing the button while the
back door is opening/closing
stops the operation.
To operate the back door again,
press and hold the button. The
back door will then move in the
opposite direction.

Quickly press and release the
switch to close the back door.

Pressing the switch while the back
door is opening/closing stops the
operation.
To operate the back door again,
quickly press and release the
switch. The back door will then
move in the opposite direction. (If
the back door is stopped at a posi-
tion close to the fully closed posi-
tion, the back door will only open
when the switch is quickly pressed
and released.)

Lower the back door using the
back door handle.

Vehicles without a power back
door

Make sure to push the back door
down from the outside to close it.

Vehicles with a power back
door

The back door closing assist will activate and the back door will fully
close automatically.

Power back door switch (vehicles with a power back door)

When closing the back door

Summary of Contents for Highlander guide





























































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands