Toyota Highlander guide Service Manual Download Page 256 | Manualshive

Page: 256 / 732

background image

256

4-5. Using the driving support systems

HIGHLANDER_U (OM0E017U)

Two types of sensors, located behind the front grille and windshield,
detect information necessary to operate the drive assist systems.

Radar sensor
Camera sensor

Sensors

1
2

WARNING

■

To avoid malfunction of the radar sensor

Observe the following precautions.
Otherwise, the radar sensor may not operate properly, possibly leading to
an accident resulting in death or serious injury.

●

Keep the radar sensor and front grille emblem clean at all times.

●

Do not attach accessories, stickers (including transparent stickers) or
other items to the radar sensor, front grille emblem or surrounding area.

●

Do not subject the radar sensor or surrounding area to a strong impact.
If the radar sensor, front grille, or front bumper has been subjected to a
strong impact, have the vehicle inspected by your Toyota dealer.

●

Do not disassemble the radar sensor.

●

Do not modify or paint the radar sensor, front grille emblem or surrounding
area.

●

If the radar sensor, front grille, or front bumper needs to be removed and
installed, or replaced, contact your Toyota dealer.

Radar sensor
Front grille emblem

If the front of the radar sensor or the
front or back of the front grille emblem
is dirty or covered with water droplets,
snow, etc., clean it.
Clean the radar sensor and front grille
emblem with a soft cloth so you do not
mark or damage them.

1
12

«
...
254
255
256
257
258
...
»

Summary of Contents for Highlander guide





























































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for Highlander guide

Brand: Daihatsu Pages: 1718

Brand: Jeep Pages: 212

Brand: Yakima Pages: 11

Brand: Warrior Products Pages: 2

Brand: Haibang Pages: 6

Brand: Nav TV Pages: 4

Brand: H&S Pages: 32

Brand: MVG Pages: 18

Brand: A-Tach Mounts Pages: 2

Brand: Rugged Ridge Pages: 5

Giulietta 2.0 JTDM

Brand: Alfa Romeo Pages: 14

Brand: Porsche Pages: 146

Brand: Green Valley Pages: 17

Powerbuilt 648601

Brand: AllTrade Pages: 3

SportQuest Series

Brand: Perrycraft Pages: 2

Brand: SIXTOL Pages: 32

Filtercharger 57-9004

Brand: K&N Engineering Pages: 4

Brand: Honda Pages: 219

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands