manualshive.com logo in svg

Toyota Highlander guide, Service Manual

Share
Download
Toyota Highlander guide Service Manual Download Page 427

427

5-10. Bluetooth

®

5

Audi

o system

HIGHLANDER_U (OM0E017U)

■

Compatible models

The Bluetooth

®

 audio system supports portable audio players with the follow-

ing specifications

●

Bluetooth

®

 specifications: 

Ver. 2.0, or higher (Recommended: Ver. 3.0+EDR or higher)

●

Profiles:
• A2DP (Advanced Audio Distribution Profile) Ver. 1.0, or higher 

(Recommended: Ver. 1.2 or higher) 
This is a profile to transmit stereo audio or high quality sound to Entune
Audio.

• AVRCP (Audio/Video Remote Control Profile) Ver. 1.0 or higher 

(Recommended: Ver. 1.4 or higher) 
This is a profile to allow remote control the A/V equipment.

However, please note that some functions may be limited depending on the
type of portable audio player connected.
The hands-free system supports cellular phones with the following specifica-
tions.

●

Bluetooth

®

 specification: 

Ver. 2.0 or higher (Recommended: Ver. 3.0+EDR or higher)

●

Profiles:
• HFP (Hands Free Profile) Ver. 1.0 or higher (Recommended: Ver. 1.6 or

higher) 
This is a profile to allow hands-free phone calls using a cellular phone or
head set. It has outgoing and incoming call functions.

• OPP (Object Push Profile) Ver. 1.1 or higher (Recommended: Ver. 1.2) 

This is a profile to transfer contact data. When a Bluetooth

®

 compatible

cellular phone has both PBAP and OPP, OPP cannot be used.

• PBAP (Phone Book Access Profile) Ver. 1.0 or higher (Recommended:

Ver. 1.1) 
This is a profile to transfer contact data.

• MAP (Message Access Profile) Ver.1.0 or higher

This is a profile to using phone message.

If the cellular phone does not support HFP, you cannot register it with the
hands-free system. OPP, PBAP or MAP services must be selected individu-
ally.

Summary of Contents for Highlander guide





























































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands