manualshive.com logo in svg

Toyota Highlander guide, Service Manual

Share
Download
Toyota Highlander guide Service Manual Download Page 426

426

5-10. Bluetooth

®

HIGHLANDER_U (OM0E017U)

■

Bluetooth

®

 antenna

The antenna is built into the display. 
If the portable audio player is behind the seat or in the glove box or console
box, or is touching or covered by metal objects, the connection status may
deteriorate. 
If the cellular phone is behind the seat or in the console box, or touching or
covered by metal objects, the connection status may deteriorate.

■

Battery charge/signal status

●

This display may not correspond exactly with the portable audio player or
cellular phone itself.

●

This system does not have a charging function.

●

The portable audio player or cellular phone battery will be depleted quickly
when the device is connected to Bluetooth

®

.

■

When using the Bluetooth

®

 audio and hands-free system at the same

time

The following problems may occur.

●

The Bluetooth

®

 audio connection may be interrupted.

●

Noise may be heard during Bluetooth

®

 audio playback.

■

About the contact in this system

The following data is stored for every registered cellular phone. When
another phone is connecting, you cannot read the registered data.

●

Contact data

●

Call history

●

Favorite

●

Message

When removing a Bluetooth

®

 phone from the system, the above-mentioned

data is also deleted.

Summary of Contents for Highlander guide





























































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands