Toyota AVALON 2010 Quick Reference Manual Download Page 99

Page: 99 / 494

AVALON_U (OM41437U)

1-4. Opening and closing the windows and moon roof

Power windows

Lock switch

Press the switch down to lock
passenger window switches.

Use this switch to prevent chil-
dren from accidentally opening or
closing a passenger window.

The power windows can be opened and closed using the following

switches.

One-touch closing

Closing

One-touch opening

Opening

: Pressing the switch in the

opposite direction will stop win-
dow travel partway.

Summary of Contents for AVALON 2010















































































































































































































































































































































































































































































































Search results

Summary of Contents for AVALON 2010

Reviews:

Toyota AVALON 2010, Quick Reference Manual, Page: 99 / 494

Search results

Summary of Contents for AVALON 2010

Reviews: