Toyota AVALON 2010 Quick Reference Manual Download Page 67

Page: 67 / 494

1-2. Opening, closing and locking the doors and trunk

AVALON_U (OM41437U)

Rear door child-protector lock

The door cannot be opened from
inside the vehicle when the locks
are set.

These locks can be set to prevent
children from opening the rear
doors. Push down rear door
switches to lock the rear doors.

Automatic door locking and unlocking systems

The following functions can be set or canceled:

Function

Operation

Shift position linked
door locking function

Shifting the shift lever out of “P” locks all
doors.

Shift position linked
door unlocking function

Shifting the shift lever to “P” unlocks all
doors.

Speed linked door lock-
ing function

All doors are locked when the vehicle speed is
approximately 12 mph (20 km/h) or higher.

Summary of Contents for AVALON 2010















































































































































































































































































































































































































































































































Search results

Summary of Contents for AVALON 2010

Reviews:

Toyota AVALON 2010, Quick Reference Manual, Page: 67 / 494

Search results

Summary of Contents for AVALON 2010

Reviews: