manualshive.com logo in svg

Toyota AVALON 2010, Quick Reference Manual, Page: 90 / 494

Share
Download
Toyota AVALON 2010 Quick Reference Manual Download Page 90

65

1-3. Adjustable components (seats, steering wheel, mirrors)

1

Be
fo

re driving

AVALON_U (OM41437U)

■

Seat belt extender

CAUTION

Observe the following precautions to reduce the risk of injury in the event of
sudden braking, sudden swerving or an accident. Failing to do so may cause
death or serious injury.

■

Wearing a seat belt

●

Ensure that all passengers wear a seat belt.

●

Always wear a seat belt properly.

●

Each seat belt should be used by one person only. Do not use a seat belt
for more than one person at the same time, including children.

●

Toyota recommends that children should be seated in the rear seat and
always use a seat belt and/or an appropriate child restraint system.

●

Do not recline the seat any more than necessary to achieve a proper seat-
ing position. The seat belt is most effective when the occupants are sitting
up straight and well back in the seats.

●

Do not wear the shoulder belt under your arm.

●

Always wear your seat belt low and snug across your hips.

■

Adjustable shoulder anchor

Always make sure the shoulder belt is positioned across the center of your
shoulder. The belt should be kept away from your neck, but not falling off
your shoulder. Failure to do so could reduce the amount of protection in an
accident and cause death or serious injuries in the event of a sudden stop,
sudden swerve or accident. (

→

P. 62)

If your seat belts cannot be fastened
securely because they are not long
enough, a personalized seat belt
extender is available from your Toyota
dealer free of charge.

Summary of Contents for AVALON 2010















































































































































































































































































































































































































































































































Reviews:

No comments