Toyota AVALON 2010 Quick Reference Manual Download Page 69

Page: 69 / 494

1-2. Opening, closing and locking the doors and trunk

AVALON_U (OM41437U)

Shift the shift lever to “P” or “N”,
press and hold the driver’s door
lock switch (

) for about 5

seconds then release.

The shift lever and switch posi-
tions corresponding to the
desired function to be set are
shown as follows.

Use the same procedure to can-
cel the function.

When the setting or canceling operation is complete, all doors are
locked and then unlocked.

STEP

Function

Shift lever

position

Switch position

Shift position linked door lock-
ing function

“P”

Shift position linked door
unlocking function

Speed linked door locking func-
tion

“N”

Driver’s door linked door unlock-
ing function

Summary of Contents for AVALON 2010















































































































































































































































































































































































































































































































Search results

Summary of Contents for AVALON 2010

Reviews:

Toyota AVALON 2010, Quick Reference Manual, Page: 69 / 494

Search results

Summary of Contents for AVALON 2010

Reviews: