Toyota AVALON 2010 Quick Reference Manual Download Page 65

Page: 65 / 494

1-2. Opening, closing and locking the doors and trunk

AVALON_U (OM41437U)

Doors

The vehicle can be locked and unlocked using the entry function,

wireless remote control or door lock switch.

■

Entry system (vehicles with smart key system)

→

P. 25

■

Wireless remote control

→

P. 36

■

Key

Vehicles with smart key system

The doors can also be locked and unlocked with the mechanical
key. (

→

P. 418)

Vehicles without smart key system

Locks all doors

Unlocks all doors

Turning the key unlocks the
driver’s door. Turning the key
again unlocks the other doors.

■

Door lock switch

Locks all doors

Unlocks all doors

Summary of Contents for AVALON 2010















































































































































































































































































































































































































































































































Search results

Summary of Contents for AVALON 2010

Reviews:

Toyota AVALON 2010, Quick Reference Manual, Page: 65 / 494

Search results

Summary of Contents for AVALON 2010

Reviews: