Toyota AVALON 2010 Quick Reference Manual Download Page 97

Page: 97 / 494

1-3. Adjustable components (seats, steering wheel, mirrors)

AVALON_U (OM41437U)

Outside rear view mirrors

■

The outside rear view mirrors can be operated when

Vehicles with smart key system

The “ENGINE START STOP” switch is in the ACCESSORY or IGNITION
ON mode.

Vehicles without smart key system

The engine switch is in the “ACC” or “ON” position.

■

When the mirrors are fogged up (vehicles with outside rear view mirror
defoggers)

Turn on the mirror heaters to defog the mirrors. (

→

P. 208)

Mirror angle can be adjusted using the switch.

Select a mirror to adjust.

Left

Right

Adjust the mirror.

Right

Down

Left

STEP

Summary of Contents for AVALON 2010















































































































































































































































































































































































































































































































Search results

Summary of Contents for AVALON 2010

Reviews:

Toyota AVALON 2010, Quick Reference Manual, Page: 97 / 494

Search results

Summary of Contents for AVALON 2010

Reviews: