manualshive.com logo in svg

Toyota AVALON 2010, Quick Reference Manual, Page: 91 / 494

Share
Download
Toyota AVALON 2010 Quick Reference Manual Download Page 91

66

1-3. Adjustable components (seats, steering wheel, mirrors)

AVALON_U (OM41437U)

CAUTION

■

Seat belt pretensioners

●

Do not place anything, such as a cushion, on the front passenger’s seat.
Doing so will disperse the passenger’s weight, which prevents the sensor
from detecting the passenger’s weight properly. As a result, the seat belt
pretensioner for the front passenger’s seat may not activate in the event of
a collision.

●

If the pretensioner has activated, the SRS warning light will come on. In
that case, the seat belt cannot be used again and must be replaced at
your Toyota dealer.

■

Child restraint lock function belt

Do not allow children to play with the child restraint lock function belt.

■

Seat belt damage and wear

●

Do not damage the seat belts by allowing the belt, plate or buckle to be
jammed in the door.

●

Inspect the seat belt system periodically. Check for cuts, fraying, and loose
parts. Do not use a damaged seat belt until it is replaced. Damaged seat
belts cannot protect an occupant from injury.

●

Ensure that the belt and tab are locked and the belt is not twisted. If the
seat belt does not function correctly, immediately contact your Toyota
dealer.

●

Replace the seat assembly, including the belts, if your vehicle has been
involved in a serious accident, even if there is no obvious damage.

●

Do not attempt to install, remove, modify, disassemble or dispose of a seat
belt. Have any necessary repairs carried out by your Toyota dealer. Inap-
propriate handling of the pretensioner may cause it to activate or operate
improperly and may cause death or serious injury.

Summary of Contents for AVALON 2010















































































































































































































































































































































































































































































































Reviews:

No comments