Toyota AVALON 2010 Quick Reference Manual Download Page 96

Page: 96 / 494

1-3. Adjustable components (seats, steering wheel, mirrors)

Be
fo

re driving

AVALON_U (OM41437U)

■

To prevent sensor error (vehicles with auto anti-glare inside rear view
mirror)

CAUTION

■

While driving

Do not adjust the position of the mirror.
Doing so may lead to mishandling of the vehicle and an accident, or result-
ing in death or serious injury.

To ensure correct functioning of the sen-
sors, do not touch or cover the sensors.

Summary of Contents for AVALON 2010















































































































































































































































































































































































































































































































Search results

Summary of Contents for AVALON 2010

Reviews:

Toyota AVALON 2010, Quick Reference Manual, Page: 96 / 494

Search results

Summary of Contents for AVALON 2010

Reviews: