Toyota AVALON 2010 Quick Reference Manual Download Page 87

Page: 87 / 494

1-3. Adjustable components (seats, steering wheel, mirrors)

AVALON_U (OM41437U)

Seat belt comfort guide (outside rear seats)

If the shoulder belt sits close to a person’s neck, use the seat belt
comfort guide.

Pull the comfort guide from the
pocket.

Slide the belt past the slot of the
guide.

The elastic must be behind the
seat belt.

■

Adjusting the height of the belt (front seats)

Down

Move the height adjuster up
and down as needed until you
hear a click.

STEP

Summary of Contents for AVALON 2010















































































































































































































































































































































































































































































































Search results

Summary of Contents for AVALON 2010

Reviews:

Toyota AVALON 2010, Quick Reference Manual, Page: 87 / 494

Search results

Summary of Contents for AVALON 2010

Reviews: