Toyota AVALON 2010 Quick Reference Manual Download Page 84

Page: 84 / 494

1-3. Adjustable components (seats, steering wheel, mirrors)

Be
fo

re driving

AVALON_U (OM41437U)

Head restraints

■

Removing the head restraints

■

Installing the head restraints

Head restraints are provided for all seats.

Down

Push and hold the lock release
button when lowering the head
restraint.

Lock

release button

Pull the head restraint up while pushing
the lock release button.

Align the head restraint with the installa-
tion holes and push it down to the lock
position.

Press and hold the lock release button
when lowering the head restraint.

Summary of Contents for AVALON 2010















































































































































































































































































































































































































































































































Search results

Summary of Contents for AVALON 2010

Reviews:

Toyota AVALON 2010, Quick Reference Manual, Page: 84 / 494

Search results

Summary of Contents for AVALON 2010

Reviews: