Toyota AVALON 2010 Quick Reference Manual Download Page 66 | Manualshive

Page: 66 / 494

Toyota AVALON 2010 Quick Reference Manual Download Page 66

41

1-2. Opening, closing and locking the doors and trunk

1

Be
fo

re driving

AVALON_U (OM41437U)

Locking the front doors from the outside without a key

Move the inside lock button to the lock position.

Close the door.

Vehicles with smart key system

The door cannot be locked if the “ENGINE START STOP” switch is
in the ACCESSORY or IGNITION ON mode, or the electronic key
is left inside the vehicle.

The key may not be detected correctly and the door may be locked.

Vehicles without smart key system

The door cannot be locked if either front door is open and the key
is in the engine switch.

■

Inside lock button

Locks the door

Unlocks the door

The front doors can be opened
by pulling the inside handles
even if the lock buttons are in
the lock position.

STEP

1

STEP

2

«
...
64
65
66
67
68
...
»

Summary of Contents for AVALON 2010















































































































































































































































































































































































































































































































Reviews:

No comments