Toyota 2015 Entune Manual Download

Page: 399 / 728

357

2-5. Driving information

PRIUS PHV_OM_OM47A11U_(U)

When

riving

Selecting tire chains

Use the tire chains of correct size and type.

Use SAE Class “S” type radial tire chains except radial cable chains
or V-bar type chains.

Regulations on the use of tire chains

Regulations regarding the use of tire chains vary depending on loca-
tion and type of road. Always check local regulations before installing
chains.

■

Tire chain installation

Observe the following precautions when installing and removing chains:

●

Install and remove tire chains in a safe location.

●

Install tire chains on the front tires only. Do not install tire chains on the
rear tires.

●

Install tire chains on front tires as tightly as possible. Retighten chains
after driving 1/4 - 1/2 mile (0.5 - 1.0 km).

●

Install tire chains following the instructions provided with the tire chains.

Summary of Contents for 2015 Entune

























































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2015 Entune

Reviews:

Related manuals for 2015 Entune

Brands by name

Popular brands

Toyota 2015 Entune, Manual

Search results

Summary of Contents for 2015 Entune

Reviews:

Related manuals for 2015 Entune

Brands by name

Popular brands