Toyota 2015 Entune Manual Download

Page: 131 / 728

1-2. Charging

PRIUS PHV_OM_OM47A11U_(U)

Press the charging port lid to
open.

The charging inlet light will illu-
minate.

Remove the charging connec-
tor cap.

Affix the cap to the cable.

Insert the charging connector
into the charging inlet.

When inserting, make sure not
to press the latch release but-
ton.

Align with the guide position
shown on the underside of the
charging connector, and push
in until a click is heard.

When charging:

P. 102

STEP

Summary of Contents for 2015 Entune

























































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2015 Entune

Reviews:

Related manuals for 2015 Entune

Brands by name

Popular brands

Toyota 2015 Entune, Manual

Search results

Summary of Contents for 2015 Entune

Reviews:

Related manuals for 2015 Entune

Brands by name

Popular brands