Toyota 2015 Entune Manual Download

Page: 627 / 728

588

5-2. Steps to take in an emergency

PRIUS PHV_OM_OM47A11U_(U)

Turn the compressor switch on
and wait for several seconds,
and then turn it off. Check the tire
inflation pressure.

If the tire inflation pressure is
under 19 psi (130 kPa, 1.3 kgf/
cm

or bar): The puncture

cannot  be  repaired.  Contact
your Toyota dealer.
If  the  tire  inflation  pressure  is
19  psi  (130  kPa,  1.3  kgf/cm

or bar) or higher, but less than
the specified air pressure:
Proceed to

If the tire inflation pressure is
the specified air pressure:
Proceed to

STEP

Summary of Contents for 2015 Entune

























































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2015 Entune

Reviews:

Related manuals for 2015 Entune

Brands by name

Popular brands

Toyota 2015 Entune, Manual

Search results

Summary of Contents for 2015 Entune

Reviews:

Related manuals for 2015 Entune

Brands by name

Popular brands