Toyota 2015 Entune Manual Download

Page: 361 / 728

319

2-4. Using other driving systems

PRIUS PHV_OM_OM47A11U_(U)

When

riving

■

Adjusting the set speed

To change the set speed, operate the lever until the desired set
speed is displayed.

Increases the speed
Decreases the speed

Fine adjustment: Momentarily
move the lever in the desired
direction.

Large adjustment: Hold the
lever in the desired direction.

In the vehicle-to-vehicle distance control mode, the set speed will be
increased or decreased as follows:

• When the set speed is shown in “MPH”

Fine adjustment: By approximately 1 mph (1.6 km/h) each time the
lever is operated

Large adjustment: By approximately 5 mph (8 km/h) for each 0.75
seconds the lever is held

• When the set speed is shown in “km/h”

Fine adjustment: By approximately 0.6 mph (1 km/h) each time the
lever is operated

Large adjustment: By approximately 3.1 mph (5 km/h) for each 0.75
seconds the lever is held

In the constant speed control mode (

P. 325), the set speed will be

increased or decreased as follows:

Fine adjustment: By approximately 1 mph (1.6 km/h) each time the
lever is operated

Large adjustment: The set speed can be increased or decreased con-
tinually until the lever is released.

ITO24P126

Summary of Contents for 2015 Entune

























































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2015 Entune

Reviews:

Related manuals for 2015 Entune

Brands by name

Popular brands

Toyota 2015 Entune, Manual

Search results

Summary of Contents for 2015 Entune

Reviews:

Related manuals for 2015 Entune

Brands by name

Popular brands