Toyota 2015 Entune Manual Download

Page: 422 / 728

381

3-1. Using the air conditioning system and defogger

PRIUS PHV_OM_OM47A11U_(U)

Interior

features

Rear window and outside rear view mirror defoggers switch

■

Operating conditions

The “POWER” switch is in ON mode.

■

The outside rear view mirror defoggers (if equipped)

Turning the rear window defogger on will turn the outside rear view mirror
defoggers on.

CAUTION

■

When the outside rear view mirror defoggers are on (if equipped)

Do not touch the outside surface of the rear view mirrors, as they can
become very hot and burn you.

NOTICE

■

To prevent 12-volt battery discharge

Do not leave the rear window defogger on longer than necessary when the
hybrid system is off.

Defoggers are used to defog the rear window, and to remove rain-
drops, dew and frost from the outside rear view mirrors (if equipped).

Turns the rear window and
outside rear view mirror defog-
gers on/off

The defoggers will automati-
cally turn off after approxi-
mately 15 minutes.

Summary of Contents for 2015 Entune

























































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2015 Entune

Reviews:

Related manuals for 2015 Entune

Brands by name

Popular brands

Toyota 2015 Entune, Manual

Search results

Summary of Contents for 2015 Entune

Reviews:

Related manuals for 2015 Entune

Brands by name

Popular brands