Toyota 2015 Entune Manual Download

Page: 580 / 728

Wh
en

ris

541

5-2. Steps to take in an emergency

PRIUS PHV_OM_OM47A11U_(U)

Follow the correction procedures.

After taking the specified steps to correct the suspected problem,
check that the warning light goes off.

Warning light

Warning light/Details

Correction

procedure

Open door warning light
(warning buzzer)

Indicates that a door is
not fully closed

Check that all the
doors are closed.

Low fuel level warning
light

Indicates remaining fuel
is approximately 1.6 gal.
(6.0 L, 1.3 Imp.gal.) or
less

Refuel the vehicle.

Driver’s seat belt
reminder light (warning
buzzer)

Warns the driver to fasten
his/her seat belts.

Fasten the seat
belt.

(On the instrument panel)

Front passenger’s seat
belt reminder light
(warning buzzer)

Warns the front passen-
ger to fasten his/her seat
belt.

Fasten the seat
belt.

Summary of Contents for 2015 Entune

























































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2015 Entune

Reviews:

Related manuals for 2015 Entune

Brands by name

Popular brands

Toyota 2015 Entune, Manual

Search results

Summary of Contents for 2015 Entune

Reviews:

Related manuals for 2015 Entune

Brands by name

Popular brands