Toyota 2015 Entune Manual Download

Page: 459 / 728

418

3-5. Other interior features

PRIUS PHV_OM_OM47A11U_(U)

Operating HomeLink

Press the appropriate HomeLink

button. The HomeLink

indicator

light should come on.

The HomeLink

compatible transceiver in your vehicle continues to send

a signal for up to 20 seconds as long as the button is pressed.

Reprogramming a HomeLink

button

Press and hold the desired HomeLink

button. After 20 seconds, the

HomeLink

indicator light will start flashing slowly. Keep pressing the

HomeLink

button and press and hold the transmitter button until the

HomeLink

indicator light changes from a slow to a rapid flash.

Release the buttons.

Erasing the entire HomeLink

memory (all three programs)

Press and hold the 2 outside but-
tons for 10 seconds until the indi-
cator light flashes.

If you sell your vehicle, be sure to
erase the programs stored in the
HomeLink

memory.

Summary of Contents for 2015 Entune

























































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2015 Entune

Reviews:

Related manuals for 2015 Entune

Brands by name

Popular brands

Toyota 2015 Entune, Manual

Search results

Summary of Contents for 2015 Entune

Reviews:

Related manuals for 2015 Entune

Brands by name

Popular brands