Toyota 2015 Entune Manual Download

Page: 182 / 728

139

1-4. Opening, closing and locking the doors

Be
fo

re
driving

PRIUS PHV_OM_OM47A11U_(U)

Locking the front doors from the outside without a key

Move the inside lock button to the lock position.
Close the door.

The door cannot be locked if the “POWER” switch is in ACCESSORY
or ON mode, or the electronic key is left inside the vehicle.

The key may not be detected correctly and the door may be locked.

Rear door child-protector lock

The door cannot be opened from
inside the vehicle when the lock
is set.

Unlock
Lock

These locks can be set to prevent
children  from  opening  the  rear
doors.  Push  down  on  each  rear
door  switch  to  lock  both  rear
doors.

STEP

Summary of Contents for 2015 Entune

























































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2015 Entune

Reviews:

Related manuals for 2015 Entune

Brands by name

Popular brands

Toyota 2015 Entune, Manual

Search results

Summary of Contents for 2015 Entune

Reviews:

Related manuals for 2015 Entune

Brands by name

Popular brands