Toyota 2005 Yaris Manual Download Page 345

Page: 345 / 540

345

7-1. Maintenance and care

nan
ce and

YARIS_F_WE_52F20E

Cleaning and protecting the vehicle interior

Remove dirt and dust using a vacuum cleaner. Wipe dirty surfaces
with a cloth dampened with lukewarm water.

●

Remove dirt and dust using a vacuum cleaner.

●

Wipe off any excess dirt and dust with a soft cloth dampened with
diluted detergent.

Use a diluted water solution of approximately 5% neutral wool detergent.

●

Wring out any excess water from the cloth and thoroughly wipe off
all remaining traces of detergent.

●

Wipe the surface with a dry, soft cloth to remove any remaining
moisture. Allow the leather to dry in a shaded and ventilated area.

●

Remove loose dirt using a vacuum cleaner.

●

Apply a mild soap solution to the synthetic leather using a sponge
or soft cloth.

●

Allow the solution to soak in for a few minutes. Remove the dirt and
wipe off the solution with a clean, damp cloth.

The following procedures will help protect your vehicle’s interior
and keep it in top condition:

Protecting the vehicle interior

Cleaning the leather areas

Cleaning the synthetic leather areas

Summary of Contents for 2005 Yaris





























































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2005 Yaris

Reviews:

Related manuals for 2005 Yaris

Brands by name

Popular brands

Toyota 2005 Yaris, Manual

Search results

Summary of Contents for 2005 Yaris

Reviews:

Related manuals for 2005 Yaris

Brands by name

Popular brands